The phone does not see the headphones

Perhaps the most common obstacle in the interaction with headphones - this is not their recognition by the main device. Therefore, in this article we will try to sort out precisely this problematic, and also consider actions that can be applied in the current situation.

What to do if the phone does not see the headphones

Indeed, it often happens that the phone has stopped seeing the headset. However, this is not the reason for the speedy disposal of the invention itself. It is preliminary recommended to find out the source of the cause, thereby answering to itself the question “why does the android not recognize the connection that has been made”. Therefore, you need to start with a health check.

Diagnostics

It is advisable to know in advance what the defect is: in the headphones or directly in the design itself. To do this, at the initial stage, the following manipulations should be performed:

1. A potentially faulty product must be attached to any possible unit. It can be as a player, TV, or just another smartphone. Thus, if the functioning occurs, then the matter is not at all in the headset. And, accordingly, in the phone.
2. In a similar way, you can connect other headphones to the original device. The outcome is similar: if the operation is carried out, then the socket and the connector are in good condition.
3. If you have a bluetooth model, you can connect it to similar equipment. Therefore, it is necessary to identify whether a pairing occurs or not.

In addition, it is worth double-checking that the battery in both gadgets is charged. You also need to pay attention to the fact that the accessory is not used by another invention. And finally, check the activation by synchronizing the smartphone with the working headset. Thus, you can immediately eliminate some of the reasons by identifying those devices that have problems in their system.

Headset incompatibility with phone

The named fault has nothing to do with the software. So the technical criterion is solved here, since the connector can be different. Conventionally, there are three groups:

• Stereo with three contacts available.
• Stereo, but with four contacts (with headset).
• Mono - he has two contacts.

Therefore, if the accessory is chosen incorrectly, characteristic defects in the work may occur. However, it should be understood that thanks to modern technology, such a case is quite rare. Today, more and more produce with the maximum number of contacts, that is, from 4, where there is a microphone.

ATTENTION. It is not excluded that the equipment will be equipped with periodic manifestations. This is explained by the fact that some manufacturers supply their products with their own characteristics, which are inherent in only one brand.

Thus, their interaction cannot succeed with others. One should not forget about the following point: cheap products can be produced due to non-observance of stable quality. This primarily applies to Chinese products. Therefore, the user as a result and receives technically low performance. Actually, at the output we get a malfunction of the accessory, which prevents the full-fledged working process. That is why it is so important to monitor the choice of acquisition. From this will directly depend on the compatibility of the two devices.

Headphone issues

In addition to the above options, there may be such as:

• Spoiled wire. At the same time, the protection function automatically works, because the phone simply ceases to recognize the presence of a device connected to it or to play audio. Of course, visually this factor is impossible to notice. However, if you find a certain position of the cord, then the sound will reappear.

REFERENCE. It is this fact that indicates the reason presented. In addition, extraneous noises and wheezing also indicate the presence of a defect. As for the repair itself, it is the opening and timely restoration of the wiring. Then the elements are fixed with a special tape.

• Contact blockage. In order to make sure of your assumption, you just need to send a little light into the connector and detect a plaque on the surface. If he really is there, then you need to carefully get rid of him. This can be done thanks to a piece of cotton wound on a match. For effectiveness, it is desirable to use alcohol. After that, wait for complete drying and re-attach the plug. In addition, the option of action may be blowing holes. If possible, it is desirable to use a canister, inside which must be compressed air. Since this problem is quite common, you can fix it yourself and without difficulty.

Therefore, it makes no sense to connect devices to each other several times. All because, without a doubt, any technique can fail. And if this happens, then you need to deal directly with faulty devices and eliminate the sources of the problem. And to do this, as it turned out, is quite simple and affordable.

Problems in the apparatus

If after the above diagnostics it turned out that the headphones are working and in good condition, then the case, respectively, is in the smartphone itself. The most likely situation is that the gadget's nest was weak. Of course, over time, it can become dirty. And if small particles are not eliminated in time, the most difficult breakdown can occur - a cord break. That is, if it is easy to remove the dirt, it is not easy to fix the broken wire. In order to ensure incorrect operation, you must perform the following steps:

• First you have to completely turn off the phone.
• Then remove not only the SIM card, but also the battery, memory card and other components of the structure.
• Next, unscrew the screws with a flat screwdriver and pry off the cover, which is made of plastic.
• At this stage, you can see if the nest is not broken. If the answer is positive, you will need to replace it.

ATTENTION. Without special knowledge and skills it is not recommended to reproduce the repair yourself, as it is easy to damage the surrounding elements of the system. Therefore, it is better to contact the service center.

In addition, do not forget about the oxidation of contacts. Such a cause is most often formed as a result of a large amount of moisture entering the connector. That is why the device cannot recognize the accessory. To do this, you also need to perform an internal autopsy and find out the source from the inside. You can first try to gently clean the hole with a cotton swab. It is important not to damage the items in the system. Otherwise, you have to restore the unit as a whole.

Software problems

RAM tend to accumulate a lot of unnecessary information that sometimes interferes with the interaction of the main device with others. In order to get rid of it, it is recommended to make a collection of settings that will be updated later to the factory settings. Indeed, this method is not pleasant, but is considered effective. So, you just need to follow the below listed points:

1. To get started is to contact directly to the phone settings. In the same place find the section under the name "recovery and reset." In some models, it may be called a little differently.
2. Then select the item “reset all parameters”. Thus, all values ​​will be set to the original default.
3. In addition, there is a small hole on the bottom of the unit, which allows you to perform instant data updates. For this you will need a needle or other thin sharp product. The item must be lowered down a few millimeters, after which there will be a click with a characteristic sound. It will automatically reset all settings. The effect will be the same as from manual execution of manipulations.

ATTENTION. It is important to understand that after this all the existing photos and videos will be deleted - in general, all the possible information that has accumulated since the acquisition of the equipment. That is, if you do not want to lose data, it is best to copy it to an SD - card or to another device.