How to put carpet on linoleum: how to lay carpet on linoleum without a backing

Carpet has long been popular due to the high level of comfort and practicality. A significant advantage is that even a beginner can put it in force. To lay it, you can not even dismantle the old coating, but simply lay a new layer. For example, it can be laid on old linoleum. This will be discussed today.

Can I put carpet on linoleum?

The first thing you need to pay attention to is the state of linoleum. For example, if a person began to rent a room, but he does not like the flooring, then you can just lay a beautiful carpet on top of the old linoleum or laminate.

If linoleum is laid on a pre-leveled surface, it is well glued, there are no swellings or waves on it, then the carpet will lie perfectly on it. Such a floor will be much warmer and more comfortable. The advantage is that you can even save money on the substrate.

If linoleum is not preserved in the best possible form, then it must be replaced. After that, level the floor, and after that lay a new floor covering. Due to this, you can evaluate the rough floor. Old linoleum can have scratches, swelling, dents, and other surfaces that impair the quality of the new flooring. On a new basis after that, all the bumps will also appear, and the view will not be perfect. This says that linoleum must at least be leveled and sanded.

What do you need to prepare

In order to start installation, you must stock up the following tools:

knife;
scissors;
roulette;
double sided tape;
gluing agent;
roller.

Laying rules

First you need to determine the type, structure and direction of the pile. It is very important to pay attention to the incident light and the presence of the pattern. When evaluating, the pile should be on one side, and if there is a drawing, it should coincide.

Stacking Requirements:

To prevent waves from appearing, use glue.
In addition, because of the increased humidity in the room, tubercles may appear.
Pay attention to how the seams fit.
The pattern should match both the width of the flooring and the length.
Correct irregularities instantly so that the carpet lasts a long time.
It is very necessary to mount a carpet made of natural pile, because it is afraid of adhesive pigments getting on the villi.

How to lay carpet on linoleum

Styling technologies

For installation, you can use several methods:

glue fastening;
free installation around the perimeter;
tension method;
styling with double-sided tape.

Prepare the surface

First you need to assess the condition of the floor on which the linoleum lies. If it has a large number of bumps of bumps, cracks, swellings, then it will need to be replaced. The floor for mounting the carpet should be strong, reliable, without cracks and other noticeable damage. This is very important, because in this case linoleum acts as a substrate.

NOTE. Often, the carpet is mounted with glue, therefore, on the surface in no case should there be a greasy sheen and other contaminants.

The best option for installing a carpet is to put it in a single piece, and not join it from many parts. To do this, you need to correctly measure the amount of necessary material:

consider the geometry of the room;
if the room is too large, then you can make a carpet under the order;
pay attention to all the irregularities and make an allowance for the baseboard;
get at least 10% more material.

Before you begin installing the carpet, you must prepare all the necessary tools.

ATTENTION. Immediately after the acquisition, the carpet should lie down in the room so that the canvas can go through the process of adaptation to the temperature regime.

Fixation methods

Glue fixing

This method is used for large rooms and rooms where there is a large cross of people. It consists in the fact that the glue is distributed evenly over the surface of the old flooring and the new material. An essential advantage of this installation method is that tubercles and swellings practically do not form. Today we will tell you how to lay carpet on linoleum without a substrate.

Work sequence:

Thoroughly flush the floor for grease stains and other contaminants.
Apply glue evenly to the old floor surface.
If necessary, put a backing.
Leave for a while, so that the material has time to stick, and then spread the product on the floor.
Then apply glue from the wrong side.
The material is placed on linoleum and pressed tightly.
After that, the carpet begins to stick on the other side.
Then we begin to trim the excess pieces.
We customize the material for the baseboard.
The final stage is the installation of the skirting board.

A significant advantage of this method is the reliability of fastening and the ability to lay the material in parts. Bubbles and swellings are excluded in this case. The disadvantages include the fact that the work is rather complicated and not every beginner will be able to complete it, and the fact that it will not be possible to reuse such coverage.

Loose hold

This method is budgetary, because it is possible to significantly save on glue, scotch tape and other installation elements. But in this case, there is a high probability of the appearance of bubbles and swellings, which significantly reduces the duration of operation of such a floor.

Work sequence:

Linoleum is washed and dried from pollution.
After that, the substrate is laid.
The product rolls out on the floor.
One of the sides is fitted under the baseboard.

During installation of the carpet with adhesive tape, you must use the level. Suitable for this tape from 60 mm. First, it is glued around the perimeter, and after that we begin to glue the grate. Putting a carpet is necessary with a small margin. Protective paper is removed from the tape while gluing the material to the floor. After that, we cut off the excess material near the wall. In this way, you can mount the carpet in parts. A good way to lay carpet on linoleum or chipboard.