How to connect two TVs to each other

Of course, every self-respecting user of such a device as a TV will provide the most comfortable environment for viewing. Therefore, some people prefer to have at once two structures that are connected to the same cable.

Thus, the technology allows not only to view various programs and programs on one unit, but also make it possible to do this on two inventions at once. In this article, we will try to analyze in detail the specifics of the whole process to achieve the goal, to find out all the features and difficulties that may be in the way.

What TVs can be interconnected

Of course, it is recommended that you first think about connecting the two devices directly to both cable and digital television. Such advice is due to significant ease of use. In addition, you can connect just a regular antenna instead of various varieties. As for the brands of inventions themselves, this is absolutely any manufacturer. Moreover, the model can be both modern and old-style. This is because there is the possibility of connecting absolutely any designs, which adds to the demand for reproduction below the presented manipulations.

To really perform all the necessary steps with high quality, you should purchase the following items:

  • RF coaxial cable;
  • Antenna;
  • Splitter

Accordingly, you will need not only the items described above. In addition to them, you should arm yourself with a knife, mounting brackets, tape measure and a divider.

Depending on the choice of the way to achieve the result, the source materials will vary, since for each a specific object will be needed.

ATTENTION! It may be that an adapter is required, since there are special ports, the connection of which is as simple as possible precisely due to the mentioned element.

These products include not only HDMI, but also VGA and DVI. However, it is important to remember that the use of adapters has the ability to significantly reduce signal quality, which is directly transmitted to the desired point.

Instruction manual

So, below is an action plan in a certain sequence, which is recommended to adhere to if you want to connect two TVs to one device - a cable:

  • When interacting with a special splitter, the coaxial cable will branch. The design itself consists of two ends, one of which is equipped with several sockets. Therefore, in such a section, it will be necessary to insert its own cable, and in others - wires with connectors that must be pre-prepared.

REFERENCE! They are purchased in specialized stores.

  • You need to buy an additional product if the receiver is used in the technique to view satellite channels. You will need fairly common connectors: VGA and DVI. Then you can play the connection directly from the source cable to the splitter jack on the input. Then the wires are launched, which are required from other similar exits of the structures.
  • As for the adapters, this is discussed above in the article. The only thing that is really important to remember is the possible deterioration in the quality of the picture played on the TV screen.

ATTENTION! When you combine the desired inventions, the same channel will be broadcast respectively on both. With the same signal reception of the same type, you can use a splitter to interact with the TV and the video card of your personal computer.

  • For permission to play different channels, you should fix the coaxial cable of the usual type of antenna in one of several connectors. Therefore, in another it will be necessary to note the cable from the splitter. Using this method, you can not only view various programs on two devices, but also switch the modes of incoming signals.
  • At the end of the procedure, you can hide under the baseboard all the wires that may interfere with your movement around your room and damage the wiring. This is done neatly and through compact mounts. This can also be done using the cable channel: all the same actions, but only the item is laid in other products.

How to check the connection

The first thing you will notice if the procedure is satisfactory is the excellent quality of the reproduced picture and the stable broadcast. Moreover, this feature should be observed on two televisions at the same time. In other cases, it will be clear that there is a defect, which must be immediately eliminated independently, or call qualified specialists.

Watch the video: How to Split HDMI to 2 TVs 1080p (March 2024).

Leave Your Comment