A hanger is one of the few pieces of furniture that should be present in any building. The bathhouse is no exception. On it you can hang both top and regular clothes. Of course, if necessary, it can be replaced with a cabinet. However, it is a luxury item because it takes up too much space. Also, its cost is several times higher.
Bath hanger
In ordinary houses, hangers are made of all kinds of materials: metal, wood, rarely plastic and so on. But the bathhouse is another place, so the requirements are increasing significantly. Do not use metal hangers or parts, because the humidity is always high, even if we talk about the dressing room. The rusting process will quickly occur, and traces of a reddish, slightly brown color will begin to appear on the clothes. It will be difficult to remove them. A hanger for a bath with your own hands is a completely reasonable solution, the main thing is to figure out the shape and size.
The form
The photo shows the options that can be distinguished by shape.
Determined with the material
The choice of material is extremely important, since the result will significantly depend on it. Plastic is a material that is practically not used in bathhouses. Firstly, the reason for personal hostility. The bath, in fact, is almost an outdoor recreation (at high temperatures), but I don’t really want to see everyday things in such situations. Secondly, security. Now many manufacturers want to make the most money, so they use cheap materials. If you come across low quality plastic, then most likely this material will begin to release toxic substances when heated. Third, physical properties. Products from it do not tolerate high temperatures, so in steam rooms and dressing rooms they quickly deform.
But then a completely logical question arises: what then should be paid attention if neither plastic nor metal can be used. The most suitable option is hangers made of wood. They were used in ancient Russia. Almost everything in the bathhouse was only made of wood.
Wood is a natural and cheap material, not afraid of corrosion. The main advantage is diversity. The problem of choice should not arise.
Dimensions and drawing
The main task when creating a hanger with your own hands is drawing up a drawing. There are no clear requirements here, show your imagination! If you have no ideas, then use ready-made drawings on the Internet.
Self-assembly of the hanger - step by step instructions
Step 1. The easiest way, which is quite enough for basic use, is a board with hooks. If desired, it is supplemented with a base of large vertically directed boards, which are fastened less thin.
Step 2. After the drawing has been completed, you need to find the materials listed below. To create the standard version that is discussed in this article, you need to:
- board. Thickness 2.5 cm. Any length. Use a proportion of 50 cm / 4 hooks.
- hooks.
- instruments.
- screws and dowels.
- marker.
Find matching hooks. The most optimal option in the bath - knots having a U-shape. Try to pick up tight and strong branches, otherwise they will quickly deteriorate.
Step 3. At this stage, you need to mark on the board or other place the parts on which the hooks will be attached. It’s best to mark them with a marker. Make holes through. Fasten the hooks with self-tapping screws and dowels, put on the plugs.
Expert Advice
1. When drilling a hole, first use a small drill. For example, if you need a gap of 8 mm, take 3 mm.
2. If there is a need to do everything evenly and symmetrically, use small nails.
3. To give harmony, it is recommended to put a wooden bench under the hanger.
Leave Your Comment