How to peel a mirror off a cabinet door

Each person can have a situation where old things get bored, but you don’t want to say goodbye to some element in the design. This can happen with the mirror example. Suppose an old cabinet is no longer needed, but how then to remove a product from it? This process and its features will be discussed in this article.

Can I remove the mirror from the cabinet door myself

Of course, this is quite realistic. You do not need huge efforts, since usually difficulties in business do not appear. You just need to know those items that will be needed for removal. And the whole algorithm will be provided below.

What tools will be needed

To work, you need to have only three items: a large screwdriver, adhesive tape and a chisel.

Possible dismantling methods

There are three options for the outcome of events that can be carried out even at home. Let's consider each of them.

The first:

  1. For the first task, you must first hone the metal ruler so that its narrow edge is as sharp as possible.
  2. This section of the product should be carefully inserted between the glass and the surface.
  3. To gradually and constantly deepen the ruler, it is advisable to tap on the edge. This will bring you to the other side of the mirror.

Second:

  1. First, it is recommended to glue the outer part of the structure with a special film or tape. This is necessary in order to prevent the occurrence of a large number of fragments.
  2. Next, take the cutting wire, which can be purchased at any auto parts store, and draw it around the corner of the mirror. In this moment, the main thing is to smoothly move it. Do not forget that you must hold the product by pressing it to the surface.
  3. After the glue has been cut, the unit can be carefully removed.

Third:

  1. Take a saw and cut out the part of the drywall on which the mirror is located.
  2. Then fill it with water and leave it to get wet.
  3. After the surface will gradually dissolve, you can use the wire to eliminate its residues.
  4. The final step is to dry the product.

As you understand, there is nothing complicated about this. The main thing is to choose the best way based on what your mirror is mounted on.

How to remove a mirror from a cabinet door: a step-by-step guide

The most common case is defined as removing parts from furniture. All that is needed is indicated above in the article. Therefore, we proceed immediately to simple actions:

  • As in the previous method, you need to glue the front side with tape to fix the position.
  • Next, without putting much effort, you should put a small part of the screwdriver under the edge.
  • At the end of the process, it is worthwhile to eliminate particles that remain from the glue and get rid of contaminants.

Work Safety Rules

It is clear that all the manipulations done are not safe. Therefore, in order to protect yourself, you must observe or at least keep the following points:

  • The clothes you will be in should completely cover all your body parts so that the skin is as protected as possible.

ATTENTION! This is required so that if the mirror bursts, the fragments cannot damage you.

  • It is important to keep children away from the process.
  • It is necessary to carry out frauds in the open air so that the terrain is not closed and isolated.
  • However, it may be that it is not possible to carry out the previous paragraph. In such a situation, general cleaning should be carried out after completion of work.
  • After the procedure, it is also worth checking yourself: are there any fragments on the skin.

Tips on how to simply and safely peel a mirror off a cabinet door

Of course, if you adhere to the above rules and instructions, then you will have the whole process go without difficulty. However, you should consider the tips that are likely to facilitate this work.

  • When cutting drywall, it is advisable to make the edges even. This will greatly facilitate your further work when you restore the surface or make repairs.
  • When you cut through the glue, you should hold the mirror. You can even call another person to help him fulfill this function.
  • To eliminate residues that are in place of the removed product, it is recommended to use a solvent. He will cope with this task perfectly. It is better to use this method in cases where further interaction with the element is planned.
  • Remember that in the process of dismantling, all actions must be smooth and proceed carefully. Sharp movement is prohibited.
  • When you turn on the ruler, it is not recommended to raise it high, otherwise the mirror may crack.

Now remove the mirror from the cabinet door is not difficult for you.

Watch the video: Removing Melamine the plastic stuff on cabinets. (March 2024).

Leave Your Comment